Guangdong Pigeon Medical Apparatus Co.,Ltd
Guangdong Pigeon Medical Apparatus Co.,Ltd
Contact Us

How Do You Set an Air Oxygen Blender?

Setting an air oxygen blender is a critical task in patient care. The device ensures that the patient receives the right amount of oxygen during medical procedures. In this article, we will discuss how to set an air oxygen blender and the factors to consider when setting the device.


Factors to Consider When Setting an Air Oxygen Blender


When setting an air oxygen blender, several factors need to be considered to ensure that the device delivers the right amount of oxygen to the patient. The following are the critical factors to consider:


Patient's Oxygen Requirements


The patient's oxygen requirements should be the primary factor to consider when setting an air oxygen blender. The healthcare professional should determine the patient's oxygen saturation levels and prescribe the right amount of oxygen required to maintain the levels. The oxygen saturation levels can be monitored using a pulse oximeter, which measures the patient's oxygen levels in the blood.


Flow Rate of Air and Oxygen


The flow rate of air and oxygen entering the blending chamber is another critical factor to consider when setting an air oxygen blender. The flow rate should be calibrated to ensure that the correct flow rate is maintained. The flow rate is measured in liters per minute (L/min) and is determined by the healthcare professional.


Oxygen Concentration


The oxygen concentration of the mixture is another important factor to consider when setting an air oxygen blender. The oxygen concentration should be calibrated to ensure that the patient receives the right amount of oxygen. The oxygen concentration is expressed as a percentage and is determined by the healthcare professional.


Safety Features


The safety features of the air oxygen blender should also be considered when setting the device. The device should be equipped with safety features such as an oxygen concentration alarm and a pressure relief valve to ensure that the patient is protected during the procedure.


Setting an Air Oxygen Blender


Setting an air oxygen blender involves several steps, as discussed below:


Ensure the Device is Calibrated


Before setting the air oxygen blender, ensure that the device is calibrated. The calibration ensures that the device delivers the right amount of oxygen to the patient. The calibration should be done by a qualified biomedical engineer or a trained technician.


Determine the Patient's Oxygen Requirements


The patient's oxygen requirements should be determined before setting the air oxygen blender. The healthcare professional should prescribe the right amount of oxygen required to maintain the patient's oxygen saturation levels.


Set the Flow Rate of Air and Oxygen


Set the flow rate of air and oxygen entering the blending chamber according to the patient's oxygen requirements. The flow rate is measured in liters per minute (L/min), and the correct flow rate should be maintained.


Set the Oxygen Concentration


Set the oxygen concentration of the mixture according to the patient's oxygen requirements. The oxygen concentration is expressed as a percentage, and the correct concentration should be maintained.


Test the Device


After setting the air oxygen blender, test the device to ensure that it is functioning correctly. Check the flow rate of air and oxygen, the oxygen concentration, and the safety features.



Related Articles
Information Products
Contact Us